The Hero Company logo
The Hero Company logo

All articles

How to Wear and Fill Your Never Forgotten Legacy Urn Cross NecklaceUpdated 2 hours ago

This guide covers everything you need to know about your Never Forgotten Legacy Urn Cross Necklace: its length, how the clasp works, how to put it on and take it off, how to fill the built-in urn, and how to care for your necklace so it lasts.

Length
This necklace comes in one size: 24". Additional lengths or extenders aren't available for purchase.

How the clasp works
Your necklace has a lobster claw clasp on one end and a ring on the other. To open the claw, press its small lever with your thumb. The claw stays open while you hold the lever and snaps closed when you release it.

Putting it on

  1. Open the clasp. Press the lever on the claw and unclip it from the ring.
  2. Place it around your neck.
  3. Clip it closed. Press the lever, hook the claw through the ring, and release the lever. Give it a light tug to make sure it's closed.

Tip: A clasp behind your neck is hard to see. Clip it closed in front of you, under your chin, then turn the necklace so the clasp sits at the back and the cross hangs in front.

Taking it off
Turn the necklace so the clasp is in front. Press the lever on the claw, unclip it from the ring, and lift the necklace off.

Filling the urn
Your cross has a small hidden compartment at the base for a keepsake, such as a pinch of ashes or a little soil from a meaningful place. It holds a small, symbolic amount, not a full portion. An urn filler kit comes with every necklace.

What's in the urn filler kit

  • Mini screwdriver: opens and closes the compartment
  • Small funnel: guides ashes or soil into the opening
  • Tamping rod (thin metal rod): gently packs the contents into place

Tip: Work over a clean tray or a sheet of paper on a flat surface. The screw is very small, and anything that spills will be easy to collect.

Open the compartment

  1. Turn the cross upside down, so the base of the long end points up. You'll see a small screw in the bottom edge.
  2. Turn the screw counterclockwise with the mini screwdriver to remove it. Keep it somewhere safe while you work.

Fill it

  1. Keeping the cross upside down, place the funnel in the opening.
  2. Slowly add a small amount of ashes or soil.
  3. If needed, use the tamping rod to gently pack everything down. Go slowly and don't force it.

Seal it

  1. Lift the funnel away and brush off any loose particles around the opening.
  2. Put the screw back in the opening.
  3. Turn it clockwise until snug. Don't overtighten. Snug is enough to seal it.

Care tips

  • Water: Take your necklace off before swimming, showering, or washing your hands. The cross has a wood overlay, and water can cause wood to swell, crack, or lose its finish. If it gets wet, pat it dry right away with a soft cloth.
  • Cleaning: Gently wipe your necklace with a soft, dry cloth. Avoid abrasive cleaners, polishing cloths, and harsh chemicals, which can damage the wood and the matte black finish.
  • Storage: When you're not wearing it, keep your necklace in a cool, dry place.

If you have any questions or need help, please contact our customer service team.

Thank you for supporting service dogs for veterans. We hope your necklace keeps your loved one close.

Was this article helpful?